by: Burger Tuning
The BMS Power Box features dyno gains of up to 10+ Horsepower and 10+lb-ft Torque, throttle remapping for snappier response, 7 performance maps, and easy installation and removal. Finally you can enjoy the car how it should have come from the factory.
Installation takes around 20 minutes using basic hand tools and is completely reversible with no cutting of wires. Simply extract the factory wire and replace it with the corresponding BMS Power Box wire. Installation is very discrete allowing most customers to leave the unit installed for basic service is NOT TRACEABLE through the factory ECU/DME or the BMW dealerships equipment and does not hurt fuel economy during normal driving. Maps stay selected until you change them.
Dynos below show horsepower and torque increase at the wheels over stock.
How to Switch Maps from the Driver's Seat
Insert the keyfob and press the start button to turn the ignition on (lights on the dash but the engine is not running). Press and hold the gas pedal down to the floor for 4 seconds or more, then release. This puts the Power Box into listen mode. If you start the engine at this point you will be on map 0. For performance maps press the gas pedal to the floor and quickly release one time for each map you would like to select. For example, for map 3 press and release the gas 3 times, then start the engine. Your map setting will be saved until it is changed.
What is the BMS Power Box?
The BMS Power Box is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air fuel ratio and spark timing. Made specifically for the BMW inline six cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map" as we call it. The BMS Power Box contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response and horsepower and torque. For maximum horsepower and throttle boosting select MAP 3. The BMS Power Box is completely invisible to the BMW dealership and testing equipment so you can leave it in for routine service.
How does it compare?
Other products just have a single setting throttle booster. No horsepower/performance is gained or you have to reflash your ECU and there is no throttle boost feature. They are costly and are detectable by BMW's equipment.
What will the BMS Power Box do?
The BMS Power Box will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your drivers seat to feel the difference. The BMS Power Box is the clear choice.
Bluetooth your JB4 to your Phone! The JB4 Connect Kit (Rev 3) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine...
$ 179.00 $ 199.00
Applications • 2001+ BMW • 2006+ Mercedes-Benz • 2011+ Ford EcoBoost • 2008+ KIA/Hyundai Settings Square light • White Stock (Multicolor) • Green Stage 1 • Orange/Red Stage 2 •...
A true plug and play tune offering safe and adjustable 25-40 Horsepower gains at the wheels! At the default setting of +3psi average increases are 30hp and 40tq to the...